Side-By-Side Comparison Weatherford TX | ATS Outdoors (Weatherford)
![Exmark Navigator Professional Grade zero-turn mower](https://cdn.exmark.com/mc/722/NVS740GKC42000.png?width=225&height=225)
NVS740GKC42000
Navigator
Equipment
UPC
193308000282
Starter
Electric
Steering Control
FeatherTouch hand-control drive levers, low-force constant speed lever.
Front Caster Tires
8 x 3.0-4 semi-pneumatic.
Drive Tires
18 x 10.5-10 Multi-Trac® C/S.
Parking Brake
Wet disc, internal in wheel motor.
Tractor Frame
Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs.
Blade Spindles
Heavy Duty cast iron right-angle gearboxes.
Electrical
12 volt battery with 15-amp alternator
Seat
Commercial grade high back contoured foam padded with hinged mounting.
Power Components
Transmission Brand
Hydro-Gear
Engine Brand
Kohler
Transmission Speeds
Infinitely Variable
Engine Model
CH740
Engine Displacement
725
Engine Series
Command™
Speed
Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse.
Transmission
Hydrostatic
Drive
Hydro-Drive
Engine Spec
3182
Engine Speed
3,600 rpm
Air Filter
Heavy-duty canister air filtration
Fuel Capacity
7.5-gallon (28.4-L), pivoting tank for easier engine service.
Drive Description
New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors.
Fuel Type
Gas Carbureted
PTO Engagement
Lever-actuated clutching belt with 6" brake band.
Drive Wheel Release
Allows movement without engine running.
Fuel Indicator
Translucent Visual
Deck Lift
Deck latch for easier height of cut adjustment
Carb Compliant
No
Safety Package
Operator Presence Controls (OPC) and drive system interlock.
ROPS
Optional 2-post foldable ROPS with seat belt and latch.
Decks
Deck Style
Floating Deck
Deck Style Description
Full floating center discharge cutting deck for dedicated bagging with patented Fill Reduction Baffles and heavy duty gear driven spindle assembly.
Width / Cutting Deck
42"
Deck Construction
7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports.
Cutting Heights
1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments .
Blade Tip Speed
Approximately 18,500 fpm.
Bag Capacity
9.5 bushel (76 gallons)
Blades
2 Blades at 22" Length
Dimensions
Width
43.2 in. (109.7 cm)
Height
51.2 in. (130.0 cm)
Length
91.8 in. (233.2 cm)
Curb Weight
1173