Side-By-Side Comparison Lennon MI | Alderman's Inc.
![QZX735GKC48300](https://cdn.exmark.com/mc/19108/QZX735GKC48300.png?width=225&height=225)
QZX735GKC48300
Quest X-Series
Equipment
UPC
193308225319
Steering Control
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Caster Forks
.375" thick caster yoke arms.
Front Caster Tires
13 x 6.5-5 smooth-tread, pneumatic.
Drive Tires
22 x 11-10 K3012
Parking Brake
Lever-actuated pawl brake.
Tractor Frame
Unibody, riveted 10-guage steel.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
Electrical
12 volt battery with 15-amp alternator
Standard Features
Engine hour meter, cup holder and hitch
Seat
Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position.
Power Components
Engine Brand
Kohler
Engine Model
KT735
Engine Displacement
735
Engine Series
7000 Series
Fuel System
Carbureted
Speed
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Drive
Hydro-Drive
Engine Spec
3099
Engine Speed
3,600 rpm
Air Filter
Standard Engine Manufacturer's air filter
Fuel Capacity
3-gallon (11.0-L), single fuel tank with single fill locations
Drive Description
Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Fuel Type
Gas Carbureted
PTO Engagement
Electromagnetic 105-ft-lb clutch
Drive Wheel Release
Allows unit movement without engine running.
Fuel Indicator
Translucent Visual
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Carb Compliant
No
Safety Package
Operator Presence Controls (OPC) and drive system interlock.
ROPS
Optional Rigid ROPS with seat belt and latch.
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck
48"
Deck Construction
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Cutting Heights
1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat.
Blade Tip Speed
Approximately 18,500 fpm.
Blades
3 Blades at 16.25" Length
Dimensions
Width
59.5 in. (151.0 cm)
Height
47.6 in. (121.0 cm)
Length
76.0 in. (193.0 cm)
Curb Weight
680