Side-By-Side Comparison Coronation AB | Future Ag Inc (Coronation)
![VXX999EKA52600](https://cdn.exmark.com/mc/21280/VXX999EKA52600.png?width=225&height=225)
VXX999EKA52600
Vertex X-Series
Equipment
UPC
193308240671
Starter
Electric
Steering Control
Twin levers with center fixed reference bar for ease of control forward and reverse
Front Caster Tires
15 x 6.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
Drive Tires
24x9.0-12 Hoosier Grass Master
Parking Brake
Lever-actuated internal motor brake
Tractor Frame
Welded, heavy-duty 1.5" x 3.0" tubular steel.
Blade Spindles
No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Cup Holder
Yes
Electrical
12-volt battery with 30-amp alternator.
Standard Features
Enhanced Engine Hour Meter
Power Components
Transmission Brand
Hydro-Gear
Engine Brand
Kawasaki
Transmission Speeds
Infinitely Variable
Engine Model
FX1000V
Engine Displacement
999
Engine Series
V-Twin
Fuel System
Electronic Fuel Injected
Speed
Infinitely variable speed selection 0–12.0 mph (19.3 kmph) forward, 0–5.0 mph (8.0 kmph) reverse
Transmission
Hydrostatic
Engine Speed
3,600 rpm
Air Filter
Heavy-duty canister air filtration system
Fuel Capacity
14-gallon (53.0-L), Dual fuel tanks on RH and LH side.
Drive Description
Two Hydro-Gear 16 cc pumps powering two Hydro gear 17.8 cubic inch motors.
Fuel Type
Gas EFI
PTO Engagement
Warner 250 ft-lb clutch
Drive System
HYDRO
Drive Wheel Release
Allows unit movement without engine running.
Fuel Indicator
Yes - Float Gauge
Deck Lift
Single point HOC; with mechanical lift-assist springs.
Carb Compliant
NO
Safety Package
Operator Presence Controls (OPC) with safety interlock system indicators
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 6. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck
52"
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
Cutting Heights
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from operator’s platform.
Blade Tip Speed
Approximately 18,500 fpm.
Blades
3 Blades at 18.00" Length
Dimensions
Width
64.79
Height
48.75
Length
70.45
Curb Weight
1250